| Intel Pentium M processor - 533MHz/400MHz system data bus Intel Celeron M processor - 400MHz system data bus Processor socket: mPGA479M |
| Intel 915GM chipset - Intel 915GM Graphics Memory Controller Hub (GMCH) - Intel 82801FBM I/O Controller Hub (ICH6M) |
| Two 184-pin DDR SDRAM DIMM sockets Supports single channel (64-bit wide) memory interface Unbuffered PC3200 (DDR400) or PC2700 (DDR333) DDR SDRAM DIMM Supports maximum of 2GB system memory using 256Mbit, 512Mbit or 1Gbit technology for x8 and x16 devices, non-ECC memory |
| Award BIOS 4Mbit flash memory |
| Supports ACPI specification and OS Directed Power Management Supports ACPI STR (Suspend to RAM) function Wake-On-Events include: - Wake-On-PS/2 Keyboard/Mouse - Wake-On-USB Keyboard/Mouse - Wake-On-LAN - Wake-On-Ring - RTC timer to power-on the system System power management supported CPU stopped clock control Microsoft®/Intel® APM 1.2 compliant Soft Power supported - ACPI v1.0a specification AC power failure recovery |
| Monitors CPU/system temperature and overheat alarm Monitors CPU(V), +1.5V, +3.3V, +5V, +12V, -12V, VBAT(V) and 5VSB(V) voltages and failure alarm Monitors CPU/chassis/2nd fan speed and failure alarm Read back capability that displays temperature, voltage and fan speed Watchdog timer function |
| Realtek ALC655 18-bit stereo full-duplex codec with independent variable sampling rate High quality differential CD input True stereo line level outputs S/PDIF-in/out interface 5.1-channel audio output |
| RTL8110SB Gigabit ethernet controller Supports 10Mbps, 100Mbps and 1Gbps data transmission IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant |
| Integrated display interface - Analog CRT DAC interface support - Supports max DAC frequency up to 400MHz - 24-bit RAMDAC support - Up to 2048x1536 mode support - Digital LVDS interface support - Integrated dual channel LVDS interface support - Supports 25 to 112MHz single/dual channel LVDS interface - Single channel LVDS interface support: 1 x 18 bpp - Dual channel LVDS interface support: 2 x 18 bpp Internal graphics features - DVMT 3.0 support - 1MB or 8MB of pre-allocated memory supported - Intel Dual-Frequency Graphics Technology High quality 3D setup and render engine High quality texture engine 3D graphics rendering enhancements |
| Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface) |
| Supports up to UltraDMA 100Mbps hard drives PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.) |
| 1 mini-DIN-6 PS/2 mouse port 1 mini-DIN-6 PS/2 keyboard port 3 DB-9 serial ports 1 DB-15 VGA port 1 RJ45 LAN port 4 USB 2.0/1.1 ports Mic-in, line-in and line-out |
| 2 connectors for 4 additional external USB 2.0/1.1 ports 1 connector for 1 external serial port 1 LCD brightness control connector 1 LVDS LCD panel connector 1 LCD/Inverter power connector 1 LCD AUX power connector 1 DIO connector 1 front audio connector for line-out and mic-in jacks 1 CD-in internal audio connector 1 S/PDIF-in/out connector 1 connector for IrDA interface 2 Serial ATA connectors 1 40-pin IDE connector 1 floppy connector (FPC type) 1 20-pin ATX power connector 1 front panel connector 1 chassis open connector 3 fan connectors |
| 1 PCI slot for PCI expansion card or customized riser card for 1, 2 or 3 PCI slots expansion (for low profile PCI card only) |
| PCI 2.2 and AC ’97 compliant |
| 6 layers, mini-ITX form factor 17cm (6.7") x 17cm (6.7") |