Anteor
Vous allez etre redirige automatiquement
sur notre nouveau site internet dans 10 secondes !

    Accueil


Produits
>Boîtiers->
>Carte Riser
>Modem Routeur
>Cartes méres->
  Alix
  ATX Industrielle
  Industrielle 5.25"
  Mini-itx->
    Obsolete
    Solutions AMD Geode
    Solutions Intel Atom
    Solutions Intel Mobile
    Solutions VIA intégrée
  PICMG
  Embarquee 3.5"
  Pico-itx
>Mini PC (Barebones)->
>Ecrans->
>Panel PC->
>Alimentations->
>Cartes d'extension->
>Stockage->
Rechercher
 
Mots-clef pour trouver un produit
Recherche avancée
Informations
>Notre activité
>Comment acheter
>Nous contacter
>S.A.V
>Partenaires
>Revue de presse
Dernieres news
Gamme Neousys 2014
PPC-1725/1727
KI-N1528R
Accueil » Catalogue » Cartes méres » Mini-itx » Solutions Intel Mobile » CMDFG5M100-N

DFI G5M100-N
[CMDFG5M100-N]

CPU
 
  • Intel® Pentium® M / Celeron® M processor (478-pin) - 400MHz system bus - Supports 64-bit host data bus and 32-bit addressing
  •    CPU Socket
     
  • mPGA479M (Socket 479)
  •    Chipset
     
  • Intel® 855GME chipset - Intel® 855GME Graphics Memory Controller Hub (GMCH) - Intel® 82801DB I/O Controller Hub (ICH4)
  •    System Memory
     
  • Two 184-pin DDR SDRAM DIMM sockets
  • 2.5V unbuffered PC1600 (DDR200), PC2100 (DDR266) or PC2700 (DDR333) DDR SDRAM DIMM with ECC support
  • Supports 128Mbit, 256Mbit and 512Mbit technologies providing maximum capacity of 1GB with x16 devices and up to 2GB with high density 512Mbit technology
  •    BIOS
     
  • Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
  • 4Mbit flash memory
  •    Power Management
     
  • Supports ACPI STR (Suspend to RAM) function
  • Wake-On-Events include: - Wake-On-PS/2 Keyboard/Mouse - Wake-On-USB - Wake-On-LAN - RTC timer to power-on the system
  • AC power failure recovery
  •    Hardware Monitor
     
  • Monitors CPU/system temperature and overheat alarm
  • Monitors 5VSB(V)/VBAT(V)/1.5V/3.3V/5V/±12V/CPU(V) voltages and failure alarm
  • Monitors CPU/chassis/2nd fan speed and failure alarm
  • Read back capability that displays temperature, voltage and fan speed
  • Watchdog timer function
  •    Audio
     
  • Realtek ALC202A
  • 18-bit stereo full-duplex codec with independent variable sampling rate
  • High quality differential CD input
  • True stereo line level outputs
  • S/PDIF-out interface
  • 2-channel audio output
  • Speaker-out jack supports 2W amplifier providing better audio quality to the headphone or speakers
  •    LAN
     
  • Intel 82562EM fast ethernet controller - Basic 10/100 Client Connection - IEEE 802.3, 10BASE-T/100BASE-TX compliant physical layer interface - IEEE 802.3u Auto-Negotiation - 48-pin SSOP, 3.3V device
  • Intel 82551QM fast ethernet controller - Integrated IEEE 802.3, 10BASE-T and 100BASE-TX compatible PHY - Glueless 32-bit PCI master interface - Glueless CardBus master interface - 128 Kbyte Flash interface - Thin BGA 15 mm2 package
  •    Graphics
     
  • Up to 64MB of dynamic video memory allocation
  • Display core frequency at 133/200/250MHz
  • Render core frequency at 100/133/166/200/250MHz
  • Intel® Dual-Frequency Graphics Technology
  • 2D graphics engine - Optimized 128-bit BLT engine - 32-bit Alpha Blended cursor - 8-bit, 16-bit and 32-bit color
  • 3D graphics engine - Enhanced Hardware Binning Instruction Set - Bi-Cubic Filtering - Linear Gamma Blending for Video Mixer Rendering (VMR) - Video Mixer Rendering (VMR) - 3D setup and render engine - DirectX and OpenGL pixelization rules - 266-MegaTexel/s peak performance - 16- and 24-bit Z-buffering; 16- and 24-bit W-buf - Optimal 3D resolution - Double and triple render buffer
  • Graphics Power Management - Dynamic Frequency Switching - Memory Self-Refresh During C3 - Intel® Display Power Saving Technology
  •    Display
     
  • Dedicated LFP (Local Flat Panel) interface - Supports data format up to 24-bpp
  • Analog display - 350MHz integrated 24-bit RAMDAC - Pixel resolution up to 1600x1200 at 85Hz and up to 2048x1536 at 75Hz
  •    LFP (Local Flat Panel) LVDS Interface
     
  • Single- or dual-channel LVDS panel support up to UXGA panel resolution with frequency range from 25MHz to 112MHz (single/dual channel)
  • Integrated PWM interface for LCD backlight inverter control
  •    IDE
     
  • Supports ATA/33, ATA/66 and ATA/100 hard drives
  • PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
  • Bus mastering reduces CPU utilization during disk transfer
  • Supports ATAPI CD-ROM, LS-120 and ZIP
  •    Rear Panel I/O Ports
     
  • 4 USB 2.0/1.1 ports
  • 2 RJ45 LAN ports
  • 3 DB-9 serial ports
  • 1 DB-15 VGA port
  • 1 mini-DIN-6 PS/2 mouse port
  • 1 mini-DIN-6 PS/2 keyboard port
  • 3 audio jacks: speaker-out, line-in and mic-in
  •    I/O Connectors
     
  • 1 connector for 2 additional external USB 2.0/1.1 ports
  • 1 connector for LCD brightness control
  • 1 connector for LVDS LCD panel
  • 1 connector for LCD power
  • 1 front audio connector for line-out and mic-in jacks
  • 1 CD-in internal audio connector
  • 1 S/PDIF-out connector
  • 1 connector for IrDA interface
  • 1 44-pin IDE 2 connector for 2.5" HDD
  • 1 40-pin IDE 1 connector for 3.5" HDD
  • 1 floppy connector (FPC connector type)
  • 1 ATX power supply connector
  • 1 Wake-On-LAN connector
  • 3 fan connectors
  •    Expansion Slots
     
  • 1 PCI slot for PCI expansion card or customized riser card slot for 1, 2 or 3 PCI slots expansion (for low profile PCI card only)
  • 1 mini PCI socket (124-pin)
  •    Compatibility
     
  • PCI 2.2 and AC97 compliant
  •    PCB
     
  • 6 layers, mini board (Mini-ITX compatible)
  • 17cm (6.7") x 17cm (6.7")
  • Cliquez ici pour telecharger la fiche au format pdf Cliquez ici pour telecharger la fiche au format pdf

    Accelerez votre Internet
    Ce produit a été ajouté à notre catalogue le jeudi 01 juin 2006.
    1055 - Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'chois132_commoncatalog.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by

    select p.products_id, p.products_image from orders_products opa, orders_products opb, orders o, products p INNER JOIN products_to_stores p2s ON p.products_id = p2s.products_id where p2s.stores_id = '1' AND opa.products_id = '272' and opa.orders_id = opb.orders_id and opb.products_id != '272' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = '1' group by p.products_id order by o.date_purchased desc limit 6

    [TEP STOP]