Anteor
Vous allez etre redirige automatiquement
sur notre nouveau site internet dans 10 secondes !

    Accueil


Produits
>Boîtiers->
>Carte Riser
>Modem Routeur
>Cartes méres->
>Mini PC (Barebones)->
>Ecrans->
>Panel PC->
>Alimentations->
  Alimentation PicoPsu
  Alimentations industrielles
>Cartes d'extension->
>Stockage->
Rechercher
 
Mots-clef pour trouver un produit
Recherche avancée
Informations
>Notre activité
>Comment acheter
>Nous contacter
>S.A.V
>Partenaires
>Revue de presse
Dernieres news
Gamme Neousys 2014
PPC-1725/1727
KI-N1528R
Accueil » Catalogue » Alimentations » Alimentations industrielles » ALIMFLEX200W-12TO18V

Fortron FSP200-63DL (12V)
[ALIMFLEX200W-12TO18V]

Alimentation 12v (12~18v) industrielle

  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • 100% burn-in under high ambient temperature(50℃)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25℃
  • 100% Hi-pot tested
  • Line input fuse protection
  • Specifications

     
    INPUT SPECIFICATIONS   
           ˙DC voltage range:  -12Vdc to -18Vdc
           ˙Input line current: -12V / 30Amps -rms maximum
    OUTPUT SPECIFICATIONS  
     
           ˙Over voltage protection: +5V output: 5.7V min, 6.5V max;
    +3.3V output: 3.7V min, 4.1V max; 
    +12V output 13.1V min, 14.5V max;
           ˙Overload protection: See specification for the detail
            
    ENVIRONMENTAL SPECIFICATIONS   
           ˙Efficiency: >68%
           ˙MTBF: 100,000 hours at Full load at 25℃
           ˙Power good signal: 100ms to 500 ms
          ˙Operating temperature: 0℃ to +50℃
          ˙Storage temperature: -20℃ to +80℃
          ˙Relative humidity: 5% to 95% RH non-condensing
     

    Cliquez ici pour telecharger la fiche au format pdf Cliquez ici pour telecharger la fiche au format pdf

    Augmenter votre bande passante
    Ce produit a été ajouté à notre catalogue le samedi 18 février 2012.
    1055 - Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'chois132_commoncatalog.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by

    select p.products_id, p.products_image from orders_products opa, orders_products opb, orders o, products p INNER JOIN products_to_stores p2s ON p.products_id = p2s.products_id where p2s.stores_id = '1' AND opa.products_id = '956' and opa.orders_id = opb.orders_id and opb.products_id != '956' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = '1' group by p.products_id order by o.date_purchased desc limit 6

    [TEP STOP]