| Form Factor | Mini-ITX form factor at 170 x 170 mm |
| CPU | Onboard Intel Celeron M 600Mhz @ 400 MHz FSB uFCBGA CPU |
| Memory | One 184-pin DIMM socket Support up to 1 GBytes DDR 266 SDRAM |
| Chipset | 82852GM GMCH and 82801DB ICH4 |
| Watchdog Timer | Programmable generates NMI or system reset watchdog timer with 1 to 255 sec. / min. of time out value |
| Power Management | ACPI 1.0 compliant, supports power saving mode with ATX PSU |
| Real Time Clock | Intel ICH4 built-in RTC with onboard lithium battery |
| PCI Enhanced IDE | Dual UltraATA/100 bus master IDE channels Support up to 4 ATAPI devices on 40-/44-pin IDE ports Jumper selectable Vcc power output on 40-pin IDE1 for power cable free DiskOnModule flash disk |
| VGA Interface | Intel 852GM GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core and 256-bit 3D engine Intel Dynamic Video Memory up to 64 MB shared with system External DB15 female connector on rear I/O panel |
| LVDS Interface | Intel 852GM GMCH built-in Intel Extreme Graphics 2 with onboard Chrontel CH7017A built-in LVDS transmitter Resolution up to 1400 x 1050 SXGA+ Support 24-bit Dual channel LVDS TFT LCD Onboard 20-pin Hirose DF13-20DP-1.25V connector |
| TV-out Interface (Optional) | Intel 852GM GMCH built-in Intel Extreme Graphics 2 with MA-SDTV Mini-AGP add on card |
| LAN Interface | Intel 82540EM Gigabit Mbps Ethernet interface |
| Audio Interface | Intel ICH4 with onboard ACL650 AC97 3D audio codec 5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface |
| PCMCIA Interface | PCI RICOH R5C475II PCMCIA PC card / CardBus controller Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification 16-/32-bit data bus, support hot swap function Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card One PCMCIA type-I/II slot |
| Hi-Speed USB 2.0 | Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface with 480 Mbps of data transfer rate and bootable setting in BIOS |
| Multi-I/O Port | 2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD, 1 x PS/2 keyboard and mouse port. |
| External I/O Port | Back panel : PS/2 keyboard and mouse port, VGA, parallel port, Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0, DC power input. Front panel : MIC, Line in & earphone or Central/Base, Rear & Front audio outputs and 2 x Dual USB port |
| Solid State Disk | CompactFlash Card CompactFlash socket supports CompactFlash Card (CFC) Support PIO mode 4 up to 16.6 MBytes of data transfer rate Default setting as secondary IDE port at master mode Bootable, driver free IDE-based flash disk Flash memory capacity up to 1 G Bytes (and beyond) DiskOnModule Flash Disk IDE-based, bootable, driver free DiskOnModule flash disk PIO mode 4 with 16.6 Mbps of data transfer rate Flash memory capacity up to 1 GB ytes (and beyond) |
| Expansive Slot | One 32-bit PCI slot supports 2 bus master PCI via riser card, and Mini-PCI or Mini-AGP port can be used optionally. |
| Environment | Power Requirement: Single 19V 6A DC input or 12V 10A DC input Board
Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor
Operation Temperature: 0 ~ 60oC (32 ~ 140oF) |
