Mini-ITX barebone
onboard Celeron M 600MHz with Intel 82852GM & ICH4 chipset support DDR266 SDRAM
Intel Extreme Graphics 2
onboard LVDS connector (24 bits dual channel)
PCMCIA Type I/II slot
Compact Flash Card Socket
5-1 Channel 3D Audio/SPDIF
USB2.0
Port Mini-PCI
Intel 82540EM Gigabit LAN

Motherboard	LV-671 Min-ITX MB
Chassis Dimension (W*H*D)	10 x 180 x 87 mm
Panel I/O ports	PS/2 Keyboard and mouse, VGA, parallel port ,Dual USB,LAN,PCMCIA,5-1CHs Audio,1 X COM ,SPDIF
Front Panel	4 x USB , Audio, CF, Power on, Reset
Disk Drive Bay:	5.25 Drivers:1 x Slime CD-ROM
	2.5 Drivers:1 x 2.5"HDD
Cooling System	One 40 mm x 40 mm x 3500 rpm system cooler
Operating Temp:	0~50˙C
Power Supply	80 W AC to DC Adapter

Spécifications de la carte mére

Form Factor	Mini-ITX form factor at 170 x 170 mm
CPU	Onboard Intel Celeron M 600Mhz @ 400 MHz FSB uFCBGA CPU
Memory	One 184-pin DIMM socket Support up to 1 GBytes DDR 266 SDRAM
Chipset	82852GM GMCH and 82801DB ICH4
Watchdog Timer	Programmable generates NMI or system reset watchdog timer with 1 to 255 sec. / min. of time out value
Power Management	ACPI 1.0 compliant, supports power saving mode with ATX PSU
Real Time Clock	Intel ICH4 built-in RTC with onboard lithium battery
PCI Enhanced IDE	Dual UltraATA/100 bus master IDE channels Support up to 4 ATAPI devices on 40-/44-pin IDE ports Jumper selectable Vcc power output on 40-pin IDE1 for power cable free DiskOnModule flash disk
VGA Interface	Intel 852GM GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core and 256-bit 3D engine Intel Dynamic Video Memory up to 64 MB shared with system External DB15 female connector on rear I/O panel
LVDS Interface	Intel 852GM GMCH built-in Intel Extreme Graphics 2 with onboard Chrontel CH7017A built-in LVDS transmitter Resolution up to 1400 x 1050 SXGA+ Support 24-bit Dual channel LVDS TFT LCD Onboard 20-pin Hirose DF13-20DP-1.25V connector
TV-out Interface (Optional)	Intel 852GM GMCH built-in Intel Extreme Graphics 2 with MA-SDTV Mini-AGP add on card
LAN Interface	Intel 82540EM Gigabit Mbps Ethernet interface
Audio Interface	Intel ICH4 with onboard ACL650 AC97 3D audio codec 5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface
PCMCIA Interface	PCI RICOH R5C475II PCMCIA PC card / CardBus controller Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification 16-/32-bit data bus, support hot swap function Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card One PCMCIA type-I/II slot
Hi-Speed USB 2.0	Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface with 480 Mbps of data transfer rate and bootable setting in BIOS
Multi-I/O Port	2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD, 1 x PS/2 keyboard and mouse port.
External I/O Port	Back panel : PS/2 keyboard and mouse port, VGA, parallel port, Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0, DC power input. Front panel : MIC, Line in & earphone or Central/Base, Rear & Front audio outputs and 2 x Dual USB port
Solid State Disk	CompactFlash Card CompactFlash socket supports CompactFlash Card (CFC) Support PIO mode 4 up to 16.6 MBytes of data transfer rate Default setting as secondary IDE port at master mode Bootable, driver free IDE-based flash disk Flash memory capacity up to 1 G Bytes (and beyond) DiskOnModule Flash Disk IDE-based, bootable, driver free DiskOnModule flash disk PIO mode 4 with 16.6 Mbps of data transfer rate Flash memory capacity up to 1 GB ytes (and beyond)
Expansive Slot	One 32-bit PCI slot supports 2 bus master PCI via riser card, and Mini-PCI or  Mini-AGP port can be used optionally.
Environment	Power Requirement: Single 19V 6A DC input or 12V 10A DC input Board    Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor    Operation Temperature: 0 ~ 60oC (32 ~ 140oF)