|
Form Factor |
Mini-ITX form factor at 170 x 170 mm |
|
CPU |
Onboard Intel Celeron M 600Mhz
@ 400 MHz FSB uFCBGA CPU |
|
Memory |
One 184-pin DIMM socket
Support up to 1 GBytes DDR 266 SDRAM |
|
Chipset |
82852GM GMCH and 82801DB ICH4 |
|
Watchdog Timer |
Programmable generates NMI or system reset watchdog timer
with 1 to 255 sec. / min. of time out value |
|
Power Management |
ACPI 1.0 compliant, supports power saving mode with ATX
PSU |
|
Real Time Clock |
Intel ICH4 built-in RTC with onboard lithium battery |
|
PCI Enhanced IDE |
Dual UltraATA/100 bus master IDE channels
Support up to 4 ATAPI devices on 40-/44-pin IDE ports
Jumper selectable Vcc power output on 40-pin IDE1
for power cable free
DiskOnModule flash disk |
|
VGA Interface |
Intel
852GM GMCH built-in
Intel Extreme Graphics 2
with 266 MHz VGA core and 256-bit 3D engine
Intel Dynamic Video Memory up to 64 MB shared with system
External DB15 female connector on rear I/O panel |
|
LVDS Interface |
Intel 852GM GMCH built-in
Intel Extreme Graphics 2
with onboard Chrontel CH7017A built-in LVDS transmitter
Resolution up to 1400 x 1050 SXGA+
Support 24-bit Dual channel LVDS TFT LCD
Onboard 20-pin Hirose DF13-20DP-1.25V connector |
|
TV-out Interface
(Optional) |
Intel
852GM GMCH built-in
Intel Extreme Graphics 2
with MA-SDTV Mini-AGP add on card |
|
LAN Interface |
Intel 82540EM Gigabit Mbps Ethernet interface
|
|
Audio Interface |
Intel ICH4 with onboard ACL650 AC97 3D audio codec
5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF
interface |
|
PCMCIA Interface
|
PCI RICOH R5C475II PCMCIA PC card / CardBus controller
Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification
16-/32-bit data bus, support hot swap function
Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus
Card
One PCMCIA type-I/II slot |
|
Hi-Speed USB 2.0 |
Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface
with 480 Mbps of data transfer rate and bootable setting
in BIOS |
|
Multi-I/O Port |
2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x
FDD,
1 x PS/2 keyboard and mouse port. |
|
External I/O Port |
Back panel : PS/2 keyboard and mouse port, VGA, parallel
port,
Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0,
DC power input.
Front panel : MIC, Line in & earphone or Central/Base,
Rear & Front audio outputs and 2 x Dual USB port |
|
Solid State Disk
|
CompactFlash Card
CompactFlash socket
supports
CompactFlash Card (CFC)
Support PIO mode 4 up
to 16.6 MBytes of data transfer rate
Default setting as
secondary IDE port at master mode
Bootable, driver free
IDE-based flash disk
Flash memory capacity
up to 1 G Bytes (and beyond)
DiskOnModule Flash Disk
IDE-based, bootable,
driver free
DiskOnModule flash disk
PIO mode 4 with 16.6
Mbps of data transfer rate
Flash memory capacity
up to 1 GB ytes (and beyond) |
|
Expansive Slot |
One 32-bit PCI slot
supports 2 bus master PCI via riser card,
and Mini-PCI or Mini-AGP
port can be used optionally. |
|
Environment |
Power Requirement:
Single 19V 6A DC input or 12V 10A DC input Board
Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor
Operation Temperature: 0 ~ 60oC (32 ~ 140oF) |
